¿Por qué se ha sugerido esta operación?¶
La vertebroplastia y la cifoplastia son procedimientos mínimamente invasivos para tratar fracturas por compresión dolorosas en la región media e inferior de la espalda. Se introduce cemento óseo dentro de un cuerpo vertebral agrietado —uno de los componentes estructurales de la columna— para estabilizarlo y aliviar el dolor. En la vertebroplastia, el cemento se inyecta directamente; en la cifoplastia, primero se crea un pequeño espacio dentro del hueso y luego se rellena.
Por lo general, sugerimos estas operaciones cuando una fractura sigue siendo dolorosa a pesar de haber recibido tratamiento no quirúrgico sin mejoría suficiente. Ese tratamiento puede incluir reposo, uso de un corsé, analgésicos y una recuperación gradual de la actividad física. Algunos pacientes requieren cirugía antes si la fractura es inestable o comprime los nervios.
El objetivo es aliviar el dolor y permitirle volver a moverse. La vertebroplastia proporciona un alivio rápido del dolor en aproximadamente el 90 % de los pacientes con fracturas osteoporóticas, es decir, fracturas causadas por huesos frágiles y debilitados. Ambos procedimientos pueden reducir el dolor y restablecer la movilidad con mayor rapidez que el tratamiento no quirúrgico por sí solo.
Antes de la operación¶
Será necesario realizar algunas pruebas de imagen antes de planificar el procedimiento. Estas pueden incluir radiografías, resonancia magnética o tomografía computarizada. Dichas pruebas confirman la fractura y nos muestran la forma del hueso roto. Además, antes de cualquier procedimiento con cemento, tomamos una pequeña muestra de tejido óseo, conocida como biopsia; esto nos ayuda a confirmar qué estamos tratando.
En los días previos a la cirugía, siga tomando sus medicamentos habituales, a menos que le indiquemos lo contrario. Deberá abstenerse de comer y beber durante siete horas antes de la operación. Pedimos este tiempo para poder adelantar su turno si la lista de cirugías avanza antes de lo previsto. Organice que alguien lo lleve a casa después del procedimiento. Use ropa holgada y cómoda, y lleve consigo una lista de sus medicamentos actuales. Si padece otras enfermedades, es posible que necesite análisis de sangre o una consulta con el anestesista, el médico encargado de administrarle la anestesia.
El día de la intervención¶
Llegará a la unidad de admisiones quirúrgicas del hospital, donde se le registrará y preparará para la cirugía. A continuación, conocerá al anestesista, el médico encargado de administrarle la anestesia. Esta operación se realiza bajo anestesia general. En ocasiones, se añade un bloqueo nervioso regional para aliviar el dolor postoperatorio; el anestesista hablará con usted al respecto ese mismo día.
Posteriormente, será llevado al quirófano, donde se realiza la intervención. Después, despertará en la sala de recuperación, donde las enfermeras le vigilarán mientras la anestesia va desapareciendo. Una vez que su estado sea estable, será trasladado a la planta de hospitalización o podrá volver a casa, según el tipo de procedimiento y su recuperación.
Descripción del procedimiento¶
Tanto la vertebroplastia como la cifoplastia son procedimientos mínimamente invasivos que se realizan mediante una pequeña incisión en la espalda, sobre el hueso fracturado. El cirujano utiliza guía por rayos X para asegurarse de que los instrumentos lleguen al lugar correcto dentro de la columna vertebral.
En la vertebroplastia, el cemento óseo se introduce directamente en el cuerpo vertebral fracturado para estabilizarlo. En la cifoplastia, el cirujano primero crea un pequeño espacio dentro del hueso, a menudo mediante un minúsculo balón que se infla y luego se retira, y posteriormente llena ese espacio con cemento. El cemento se solidifica firmemente dentro del hueso y sujeta la fractura desde el interior.
La incisión se cierra con puntos de sutura y se cubre con un apósito. Dado que el procedimiento se realiza a través de una abertura tan pequeña, no se genera una incisión grande que deba cicatrizar.
Qué puede salir mal¶
Estos procedimientos suelen ser seguros y las complicaciones son relativamente poco frecuentes. La más común es la fuga leve de cemento fuera del hueso fracturado. Esto ocurre con mayor frecuencia en la vertebroplastia que en la cifoplastia, y también cuando la fractura es causada por la propagación del cáncer en lugar de por fragilidad ósea. La mayoría de estas fugas no provocan ningún síntoma.
Cualquier intervención quirúrgica en la columna conlleva ciertos riesgos generales, como infección, hemorragia y reacciones al anestésico. También existe una pequeña probabilidad de que se produzca una nueva fractura en un cuerpo vertebral cercano posteriormente. Los factores más determinantes para la aparición de nuevas fracturas son la fragilidad de los huesos y si la columna permanece flexionada hacia adelante en el lugar de la fractura. Someterse a alguno de estos procedimientos no aumenta el riesgo de fracturas en otros niveles en comparación con el tratamiento no quirúrgico.
Antes de que tome una decisión, analizaremos todos estos riesgos con usted; además, podrá plantear cualquier pregunta en cualquier momento. En la tabla de complicaciones de esta página se detallan las tasas típicas, por si desea conocer los datos específicos.
Después de la operación¶
Despertará en la sala de recuperación, donde las enfermeras lo vigilarán mientras el efecto de la anestesia desaparece. El alivio del dolor forma parte de su plan de cuidados; nos aseguraremos de que se sienta cómodo mientras el cemento óseo se asienta y la pequeña incisión en su espalda comienza a cicatrizar. La mayoría de los pacientes pueden levantarse y moverse poco después del procedimiento, a menudo el mismo día. Durante las primeras 24 horas después de regresar a casa, debería haber alguien con usted. Su equipo médico le indicará si podrá irse a casa ese mismo día o si deberá permanecer una noche en el hospital. Dejamos el vendaje puesto durante unos 10 días; por favor, no lo retire antes de ese plazo a menos que se lo indiquemos. Lo cambiamos o lo retiramos cuando le veamos.
Recuperación¶
La mayoría de los pacientes se levantan y comienzan a moverse poco después de la intervención, a menudo el mismo día. La pequeña incisión en la espalda puede estar sensible durante unos días. Es normal que aparezca algo de hematoma alrededor del sitio de la incisión; este desaparece por sí solo. El uso de analgésicos sencillos y paseos cortos y suaves resultan de gran ayuda. Mantenga el vendaje seco y déjelo puesto durante unos 10 días; lo cambiaremos o lo retiraremos cuando venga a la consulta.
En los primeros días, haga paseos cortos por la casa, descansando cuando lo necesite. Su fisioterapeuta le guiará en movimientos suaves, aumentando gradualmente la intensidad según su tolerancia. Puede dormir en la posición que le resulte más cómoda. Evite levantar objetos pesados, doblarse o girar hasta que le indiquemos que es seguro hacerlo. Una vez que el dolor disminuya, tareas cotidianas como cocinar o ducharse resultarán más fáciles.
El cemento óseo se solidifica dentro del hueso durante la propia operación, de modo que la fractura queda estabilizada desde el interior de inmediato. A medida que el dolor disminuya, notará que puede permanecer de pie y caminar durante periodos más largos. La vuelta a sus actividades habituales se produce por etapas, y su propio cirujano le autorizará cada una a medida que la alcance. Para conducir, lo importante es haber dejado de tomar analgésicos potentes, poder permanecer sentado en la posición de conducción durante todo el trayecto sin un dolor que le distraiga, poder girarse lo suficiente para comprobar los espejos y los ángulos muertos, y poder frenar con fuerza sin vacilar. Si se le ha indicado un corsé lumbar o restricciones de movimiento, estos tienen prioridad.
La recuperación varía de una persona a otra. Su cronograma personal puede diferir; su cirujano y fisioterapeuta le guiarán en cada revisión.
Cuándo llamarnos¶
Llámenos si tiene fiebre, o si la piel alrededor del pequeño corte en su espalda se vuelve más roja, hinchada o comienza a exudar líquido. Llámenos si nota dolor nuevo, entumecimiento o debilidad, o si el dolor de su fractura empeora mucho de repente. Llámenos también si el dolor regresa o si su columna parece curvarse hacia adelante más que antes, lo que puede significar que el hueso tratado ha colapsado nuevamente y ha perdido parte de la altura que se había recuperado. Comuníquese con la clínica en lugar de esperar a su próxima cita de seguimiento. Acuda a urgencias si presenta hinchazón o dolor en la pantorrilla, dificultad para respirar, dolor en el pecho, pérdida de sensibilidad en las piernas o problemas para moverlas. Estos síntomas requieren evaluación inmediata.
Evidence & references
This is the clinical evidence summary written for health professionals. It is technical, and it lists the research this page was built from. You do not need to read it to understand your treatment or to make a decision about it.
Anatomy & Pathophysiology¶
Osseous Anatomy¶
- The bony anatomy of the spine consists of 7 cervical vertebrae, 12 thoracic vertebrae, 5 lumbar vertebrae, 5 fused sacral vertebrae, and 4 or 5 fused coccygeal vertebrae [3].
- The vertebral body consists of a fairly cylindrical mass of bone connected by the pedicles to the posterior arch of the vertebra, which consists of the lamina and spinous process [3].
- The spinal canal is created by the vertebral body anteriorly, the lamina posteriorly, and the pedicles laterally [3].
- The vertebral bodies function primarily to bear weight and transfer forces to the pelvis and hips [3].
- The posterior elements provide protection to the neural structures and function as a tension band [3].
- The thoracic spine represents two transitional zones: from the highly mobile cervical spine into the more rigid thoracic region, and then back to the more mobile lumbar spine [5].
- The thoracic spine, in conjunction with the ribs and sternum, forms a bony “cube” that is an inherently stable structure providing protection to the heart and lungs [5].
- Thoracic vertebral bodies are larger than cervical vertebrae but smaller than lumbar vertebrae [5].
- Thoracic pedicles arise more superiorly from the posterior vertebral body than in the cervical or lumbar spine and project obliquely from superodorsal to inferoventral [5].
- The spinal canal is narrowest in the thoracic region of the spine [5].
- The spinous processes of the midthoracic spine project sharply obliquely, overlapping the lamina and spinous processes inferiorly [5].
- The superior articular facets of the thoracic spine project cranially from the junction of the laminae and pedicles and are oriented coronally [5].
- The rib heads articulate with the lateral aspect of the vertebral bodies, with a shared articulation at the level of the disk space referred to as a demifacet [5].
- The transverse processes of the thoracic spine project obliquely superolaterally, with the costotransverse joint located along their ventral aspect [5].
- There is no costotransverse articulation at T11 or T12 [5].
- The vertebral body is composed of an inner region of cancellous bone surrounded by a thin shell of cortical bone [8].
- Each vertebra is composed of an anterior portion (vertebral body) and a posterior arch formed by the pedicle, facet, lamina, and spinous process [8].
- The cervical spine is composed of seven vertebrae and assumes a lordotic curvature [8].
- The thoracic spine is composed of 12 vertebrae and assumes a kyphotic curvature [8].
- The lumbar spine is composed of five vertebrae and assumes a lordotic curvature [8].
- The five fused sacral vertebrae form a portion of the pelvis [8].
- Four small, fused vertebrae form the coccyx at the most caudal extent of the spinal column [8].
- The vertebral column comprises 33 vertebrae divided into five sections: 7 cervical, 12 thoracic, 5 lumbar, 5 sacral, and 4 coccygeal [11].
- The sacral and coccygeal vertebrae are fused, which typically allows for 24 mobile segments [11].
- The length of the vertebral column averages 72 cm in men and 7 to 10 cm less in women [11].
- The vertebral canal extends throughout the length of the column and provides protection for the spinal cord, conus medullaris, and cauda equina [11].
- The cervical endplates have a cup-in-saucer configuration, distinct from the normally flat endplates of the thoracic and lumbar vertebrae [20].
- The posterior aspect of the cervical transverse process guides the cervical spinal nerves as they exit the spinal canal, with the spinal nerves lying posterior to the vertebral artery [20].
Intervertebral Disc Anatomy¶
- The intervertebral disc (IVD) separates each successive vertebral body except between the atlas (C1) and the axis (C2) [8].
- The IVD is composed of an inner nucleus pulposus (NP) and an outer ring termed the anulus fibrosus (AF) [8].
- The nucleus pulposus serves as an osmotic pump to attract water and generate hydraulic pressure when subjected to significant loads [8].
- The anulus fibrosus encapsulates the gelatinous nucleus pulposus and provides mechanical support to contain NP pressure and constrain intervertebral rotations [8].
- The outer anulus fibrosus is integrated with the vertebral rim via a fibrocartilage enthesis that consists of a thin layer of calcified cartilage, or “tidemark” [8].
- The end plate is a bilayer of cartilage and bone that separates the disk from adjacent vertebrae [8].
- The cartilage end plate integrates with the inner anulus fibrosus to fully encapsulate the nucleus pulposus [8].
- The end plate must be strong and thick to resist significant loads but also permeable to favor chemical transport and disk cellular vitality [8].
Ligaments and Soft Tissue¶
- Additional soft-tissue structures providing passive support include the anterior longitudinal ligament, posterior longitudinal ligament, ligamentum flavum, facet joint capsule, interspinous ligament, and supraspinous ligaments [8].
- The erector spinae muscle runs longitudinally on the dorsal surface of the spinal column and functions to extend the spine [8].
- The psoas muscle runs longitudinally on the ventrolateral surface of the spinal column and serves to flex the hip or laterally bend the trunk [8].
- The multifidus muscle connects intersegmentally to stabilize the spine by acting like a bowstring to maintain lordosis [8].
Biomechanics and Alignment¶
- Normal cervical alignment is approximately 15° of lordosis [7].
- The thoracic spine generally ranges from 20° to 40° of kyphosis [7].
- The lumbar spine has approximately 40° to 50° of lordosis [7].
- Kyphotic segments (thoracic, sacral) are considered “primary” curvatures as they are present in utero and at birth [7].
- The lordotic curvatures of the cervical and lumbar spine develop secondarily later in life to allow the growing child to develop an upright posture [7].
- The center of gravity of the spinal column runs from the odontoid process proximally through the sacral promontory caudally [7].
- Changes in sagittal balance that shift the center of gravity too far ventrally can result in significant pain and disability [7].
- The functional spinal unit consists of two vertebrae, the disk between them, and the facet joints (and their capsules) [7].
- The vertebral bodies bear 70% to 90% of the static axial load of the spine [7].
- The facet joints support 10% to 20% of axial load in a standing, neutral alignment [7].
- In extension, the facet joints may bear up to 30% of the axial load [7].
- In flexion, the facet joints may be burdened with up to 50% of the anterior shear load [7].
- As compressive forces are applied to the disk, the nucleus pulposus deforms, redistributing axial forces radially [7].
- The radial pressure generated by the nucleus pulposus is resisted by the tensile properties of the alternating bands of fibers within the anulus fibrosus [7].
- The spinous processes and transverse processes act as lever arms, providing mechanical advantage for the muscles that insert along their surfaces [7].
Vascular Anatomy¶
- The thoracic and lumbar levels are supplied by paired segmental arteries which originate directly from the aorta along its posterior surface [12].
- Branches of the segmental arteries supply the vertebral body, the paraspinal musculature, and the spinal cord [12].
- The cervical spine derives its circulation primarily from the vertebral arteries [12].
- The vertebral arteries typically enter the transverse foramen at the C6 level and run proximally through the transverse foramina to C1 [12].
- The vertebral arteries course posteriorly over the superior aspect of the C1 ring before turning proximally again and entering the foramen magnum [12].
- The vertebral arteries merge to form the basilar artery at the foramen magnum [12].
- The vascular supply of the spinal cord is primarily from the medullary branches of the segmental spinal arteries [12].
- The anterior spinal artery is responsible for supplying approximately 80% of the vascular supply to the spinal cord [12].
- The arteria medullaris magna (AMM), also known as the arteria radicularis magna or artery of Adamkiewicz, is the largest anterior segmental artery [12].
- The AMM typically arises on the left side anywhere between the T8 and L1 level [12].
Neural Anatomy¶
- A typical mixed spinal nerve has three distinct components: motor, sensory, and sympathetic [13].
- Motor rootlets leave the anterolateral sulcus of the spinal cord and unite to form each motor root, with fibers arising from anterior horn cells to innervate skeletal muscles [13].
- Sensory fibers arise from pain, thermal, tactile, and stretch receptors, with cell bodies located within the dorsal root ganglia [13].
- The sympathetic component of all 31 mixed spinal nerves leaves the spinal cord along only 14 motor roots [13].
- The cells of origin for the sympathetic component are in the intermediolateral cell column that extends throughout the thoracic and upper lumbar cord segments [13].
- Mixed spinal nerves, having left the intervertebral foramina, receive their sympathetic component and promptly branch into anterior and posterior primary rami [13].
- The posterior primary rami are directed posteriorly and supply the paraspinal musculature and the skin along the posterior aspect of the trunk, neck, and head [13].
- The anterior primary rami of all the cervical, the first thoracic, and all the lumbosacral nerves join in the formation of plexuses [13].
- The upper four cervical anterior rami form the cervical plexus [13].
- The lower four cervical and first thoracic anterior rami form the brachial plexus [13].
- The first three and a part of the fourth lumbar anterior rami form the lumbar plexus [13].
- The sacral anterior rami along with the fifth lumbar and a part of the fourth join to form the lumbosacral plexus [13].
- The area of skin supplied by the fibers of a single spinal root is called a dermatome [13].
- Segmental dermatomal patterns are well preserved in the thoracic region but not in the limbs [13].
Pathophysiology of Degeneration and Stenosis¶
- Degeneration of the disc occurs with disc narrowing and subsequent ligamentous redundancy, which compromises the spinal canal area [17].
- Instability resulting from disc degeneration may precipitate the formation of facet overgrowth and ligamentous hypertrophy [17].
- The ligamentum flavum may be markedly thickened into the lateral recess where it attaches to the facet capsule, causing nerve root compression [17].
- Central spinal stenosis denotes involvement of the area between the facet joints, which is occupied by the dura and its contents [17].
- Symptomatic central spinal stenosis results in neurogenic claudication with generalized leg pain [17].
- The lateral recess, also known as “Lee’s entrance zone,” begins at the medial border of the superior articular process and extends to the medial border of the pedicle [17].
- Facet arthritis most frequently causes stenosis in the lateral recess zone, along with vertebral body spurring and disc or anulus pathology [17].
- “Lee’s midzone” describes the foraminal region, which lies ventral to the pars [17].
- The dorsal root ganglion and ventral motor root occupy 30% of the space in the foraminal region [17].
- The exit zone is identified as the area lateral to the facet joint [17].
- The most common type of spinal stenosis is caused by degenerative arthritis of the spine, characterized by hyperostosis and spinal rigidity in elderly patients [17].
- The L4-5 level is the most commonly involved in degenerative spinal stenosis, followed by L5-S1 and L3-4 [17].
- Congenital spinal stenosis usually is central and is evident on imaging studies [17].
- In achondroplasia, the canal is narrowed in the anteroposterior plane owing to shortened pedicles and in lateral diameter because of diminished interpedicular distance [17].
Investigations¶
Magnetic Resonance Imaging (MRI)¶
- MRI is the standard for advanced imaging of the spine and is superior to CT in most circumstances, particularly for the identification of infections, tumors, and degenerative changes within the discs [23].
- MRI is superior to CT for imaging the intervertebral disc and directly imaging neural structures [23].
- MRI typically shows the entire region of the spine (cervical, thoracic, or lumbar) [23].
- MRI allows for the imaging of the nerve root in the foramen, which is difficult even with postmyelography CT because the subarachnoid space and contrast agent do not extend fully through the foramen [23].
- In the lumbar and thoracic spine, MRI has supplanted CT myelography because it is noninvasive and less expensive [22].
- The combination of high soft-tissue contrast and high resolution in MRI allows ideal evaluation of the intervertebral discs, nerve roots, posterior longitudinal ligament, and intervertebral foramen [22].
- MRI provides excellent assessment of the spinal cord [22].
- A normal intervertebral disc exhibits signal hyperintensity on T2-weighted images due to its high water content [22].
- The aging process results in a gradual desiccation of the disc material and a loss of T2-weighted signal hyperintensity [22].
- Disc herniations or extrusions appear as convex or polypoid masses extending posteriorly into the ventral epidural space, frequently maintaining a signal intensity similar to that of the disc of origin [22].
- Sagittal T2-weighted or gradient-echo images create a “myelographic” effect useful for evaluating compromise of the subarachnoid space [22].
- Sagittal T1-weighted images should be closely examined to identify narrowing of the neuroforamina [22].
- Normal T1-weighted hyperintense perineural fat in the foramina provides excellent contrast to darker displaced disc material [22].
- Far lateral disc herniations are best seen on selected axial images localized through disc levels [22].
- Free disc fragments appear discontinuous with the intervertebral disc and usually exhibit intermediate T1-weighted signal in contrast to the hypointense cerebrospinal fluid [22].
- MRI can detect significant spinal cord compromise, with edema within the cord readily demonstrated as hyperintensity on T2-weighted images [22].
- MRI evidence of disc degeneration has been reported in the cervical spine in 25% of patients younger than 40 years and in 60% of patients 60 years and older [23].
- Lumbar disc degeneration has been found in 35% of patients aged 20 to 39 years and in 100% of patients older than 50 years [23].
- The best way to obtain meaningful clinical information from MRI is to have a specific question derived from the patient’s history and physical examination, posed using the parameters of neural compression, instability, and deformity [23].
- Only abnormalities in the categories of neural compression, instability, or deformity are important for operative treatment [23].
- Diffusion tensor imaging is an MRI technique based on the diffusion rate of water in tissue that has been reported to demonstrate spinal cord impairment in patients with early stage cervical spondylosis before it is visible on plain MRI scans [26].
Computed Tomography (CT)¶
- CT has largely supplanted plain radiographs as the initial screening study of choice for spine injuries due to its combination of high sensitivity and specificity [24].
- CT allows for the identification of subtler fractures that might have remained undiagnosed on plain radiographs and provides additional three-dimensional detail [24].
- CT is particularly useful in differentiating compression fractures from burst fractures [24].
- CT identifies subtle features of injury such as the presence of facet widening [24].
- CT evaluation is essential in determining the stability of thoracic and lumbar spine fractures [24].
- The primary disadvantage of CT imaging in comparison to MRI is that it does not provide as good a visualization of the soft tissues [24].
- CT myelography is invasive and more costly than MRI and is reserved for patients who have contraindications to MRI or who have equivocal MRI examinations [22].
Diagnostic Principles¶
- Proper diagnosis of a spine tumor with a biopsy is the critical first step in devising proper treatment for a patient who presents with a spine tumor [2].
- Careful identification of the tumor type by direct biopsy decreases the chance of misdiagnosis and performing unnecessary or incorrect surgery [2].
- MRI findings must be carefully correlated with the clinical impression because MRI shows anatomy that is abnormal but may be asymptomatic [23].
- The specific location of an abnormality should be suspected before MRI and confirmed with the study [23].
References¶
[2] Orthopaedic Knowledge Update 13 Ebook Without Multimedia. Concepts in Primary Benign, Primary Malignant, and Metastatic Tumors of the Spine > Summary.
[3] Orthopaedic Knowledge Update 13 Ebook Without Multimedia. Spinal Anatomy > Osseous Anatomy.
[5] Orthopaedic Knowledge Update 13 Ebook Without Multimedia. Spinal Anatomy > Osseous Anatomy > Thoracic Vertebrae.
[7] Orthopaedic Knowledge Update 13 Ebook Without Multimedia. Spinal Anatomy > Biomechanics.
[8] Orthopaedic Basic Science Fifth Edition Print Ebook. Biology and Mechanics of the Skeletal Extracellular Matrix > Anatomy.
[11] Campbell S Operative Orthopaedics 4 Volume Set. RECONSTRUCTION OF THE PATELLOFEMORAL AND PATELLOTIBIAL LIGAMENTS WITH A SEMITENDINOSUS TENDON GRAFT > ANATOMY OF VERTEBRAL COLUMN.
[12] Orthopaedic Knowledge Update 13 Ebook Without Multimedia. Spinal Anatomy > Vascular Anatomy.
[13] Campbell S Operative Orthopaedics 4 Volume Set. PERIPHERAL NERVE INJURIES OF THE UPPER AND LOWER EXTREMITIES > ANATOMY OF THE SPINAL NERVES > COMPONENTS OF MIXED SPINAL NERVES.
[17] Campbell S Operative Orthopaedics 4 Volume Set. OVERVIEW OF LUMBAR AND THORACIC DISC DEGENERATION AND HERNIATION > STENOSIS OF THE THORACIC AND LUMBAR SPINE > ANATOMY.
[20] Rockwood And Green S Fractures In Adults. Imaging of Cervical Spine Fractures and Dislocations > Lower Cervical Spine (C3–C7).
[22] Campbell S Operative Orthopaedics 4 Volume Set. INTERVERTEBRAL DISC DISEASE.
[23] Campbell S Operative Orthopaedics 4 Volume Set. OVERVIEW OF LUMBAR AND THORACIC DISC DEGENERATION AND HERNIATION > MAGNETIC RESONANCE IMAGING.
[24] Rockwood And Green S Fractures In Adults. Imaging of Cervical Spine Fractures and Dislocations > Computed Tomography.
[26] Campbell S Operative Orthopaedics 4 Volume Set. POSTERIOR APPROACH TO THE LUMBAR SPINE, L1 TO L5 > MAGNETIC RESONANCE IMAGING.
